FRIENDS MODELS is having a June 2019/Father's Day sale......on the 3/4" scale P7, K4, D30 switcher, and Langworthy Hudson.....also for the 1" scale American or Ten Wheeler castings.
Please note that the cylinder and drive wheels sections are available for the Lester Friend 1" scale Atlantic as well, and sale pricing applies. I will cast any or all of the 1" Atlantic parts, for anyone who has purchased the drawings, the cylinders, and the wheels. Lester's construction articles are also available for it.
THE SALE IS THIS: 10% off any complete section of castings, or, 15% off two or more sections of castings, purchased for any of the above locomotives.
Also, 10% off TOM THUMB wheel castings if all 8 wheels for engine and tender are purchased.
Also, 10% off any purchase of Hiraoka 3/4" A3 "starter packages". 15% off Hiraoka 1-1/2" scale castings if a complete set of wheels and cylinders is purchased.
10% off of Andrews trucks.
SALE pricing does not apply to ANGUS or DINKY castings at this time.
Please inquire (email@example.com), and I will send you a PayPal invoice for the section(s) you want, that reflects all discounts and correct shipping amounts. The sale pricing only applies to drawings if drawings are purchased with one or more sections of castings, and does not apply to: books, catalogs, pumps, accessories, drawings by themselves, prior purchases, partial sections, custom orders, closeouts or other "on sale" items, shipping, etc.
Sale in effect until June 30th.
Mention "June 2019 Sale" when inquiring, to receive the sale discount.
3/4" scale piston valve cylinders, plain valve core and no exhaust port coring. Made in Canada for the P7 President Washington locomotive. This is the last of the Canadian production and it has been replaced by the fully cored version now available from Friends.
Closeout special: 3/4" scale piston valve cylinders in iron, by HJ Coventry, for the P7 "President Washington". May also be used on freelance Atlantics or Pacifics. This is the last of the Canadian-production cylinders that were cast by the prior owner of the P7 design. Valve chamber has a plain round core and exhaust ports are not cored in. Valve bore clearances will need to be "step bored" by an experienced machinist, or, a "stepped" liner may be pressed in & utilized. Exhaust ports must be angle drilled in. This is how these cylinders were supplied from about 1979 to about 2010 to builders of the P7 "President".
Closeout pricing $250 per pair. Limited supply. This cylinder set has been replaced by the fully cored version now available from Friends.
Please join the Friends Models Email List below, to be kept notified of specials and sales offered by Friends.